Program
Thursday, September 20, morningRoom Richard-Strauss
08:30 - 09:15 Plenary Lecture PL0006 |
Christian Oehr, Stuttgart, Germany Advancements and perspectives on plasma-deposited polymer coatings in the legacy of Riccardo d’Agostino Pietro Favia1 1Dept. Biosciences, University of Bari, Bari, Italy Abstract |
||||
Oral Session | Session 18 - Polymer modification and characterization
|
||||
09:25 - 09:55 Keynote Lecture KN1800 |
Surface technology for additive manufacturing with polymers Andreas Holländer1, Patrick Cosemans2 1Fraunhofer IAP, Potsdam, Germany, 2Sirris, Diepenbeek, Belgium Abstract |
||||
09:55 - 10:15 OR1801 ![]() |
XPS investigation of the mechanisms responsible for activation of the surface of ultrahigh molecular weight polyethylene with a medium pressure dielectric barrier discharge Parinaz Saadat Esbah Tabaei1, Pieter Cools1, Rino Morent1, Nathalie De Geyter1 1Ghent university Department of applied p, Ghent, Belgium Abstract |
||||
10:15 - 10:35 OR1802 |
POLYMER SURFACES MODIFIED BY ATMOSPHERIC PLASMA : CHEMICAL CHARACTERIZATION OF FUNCTIONALIZATION AND MULTILAYER COATING de PUYDT Yves1, Vincent DI MEO 2, Laurent DUPUY1, Eric GAT2, Charbel ROUKOSS1, Nicolas VANDENCASTEELE2 1TESCAN ANALYTICS, FUVEAU, France, 2COATING PLASMA INNOVATION, Peynier, France Abstract |
||||
10:35 - 10:55 OR1803 |
Large area roll-to-roll processing of flexible polymers by atmospheric pressure hydrogen plasma Richard Krumpolec1, Miroslav Zemánek1, Jakub Kelar1, Zlata Tučeková1, Jana Jurmanová1, Mirko Černák1 1Masaryk University, Brno, Czech Republic Abstract |
||||
10:55 - 11:15 | Coffee break |
||||
11:15 - 11:35 OR1804 |
Influence of transporting discharge and plasma gun on surface modification of UHMWPE film and HDPE tube Azadeh Valinattaj Omran1, Eric Robert1, Jean-Michel Pouvesle1, Farzaneh Arefi-Khonsari2 1GREMI UMR 7344 CNRS/Université d’Orléans, ORLEANS, France, 2Sorbonne Universites, UPMC Univ Paris 06, Paris, France Abstract |
||||
11:35 - 11:55 OR1805 |
Understanding the growth of ultra-thin plasma polymers on molecularly defined polymer surfaces Christian Hoppe1, Felix Mitschker2, Teresa de los Arcos1, Peter Awakowicz2, Guido Grundmeier1 1University of Paderborn, Paderborn, Germany, 2Ruhr-University Bochum, Bochum, Germany Abstract |
||||
11:55 - 12:15 OR1806 |
Plasma activation of PEEK surfaces: effect of texture and surface energy on practical adhesion. David Gravis1, Fabienne Poncin-Epaillard2, Jean-François Coulon1 1ECAM Rennes - Louis de Broglie, Bruz (Rennes), France, 2IMMM, Le Mans, France Abstract |
||||
12:15 - 12:35 OR1807 |
Atmospheric Pressure Plasma activation of natural fibres for improved matrix interaction Rüdiger Sachs1, Sergey Stepanov1, Jörg Ihde1, Ralph Wilken1, Bernd Mayer2 1Fraunhofer IFAM, Bremen, Germany, 2University of Bremen, Bremen, Germany Abstract |
||||
12:35 - 12:55 OR1808 |
Modeling the evolution of rough profiles of polymeric substrates during plasma etching: The interaction between surface charging and roughness George Kokkoris1, George Memos1, Elefterios Lidorikis2, Evangelos Gogolides1 1NCSR Demokritos, Agia Paraskevi, Greece, 2University of Ioannina, Ioannina, Greece Abstract |
||||
12:55 - 14:20 | Lunch break |
Thursday, September 20, morningRoom Zugspitze
08:30 - 09:15 | Plenary Lecture PL0006, Room Richard-Strauss |
||||
Oral Session | Session 19 - HiPIMS I
|
||||
09:25 - 09:55 Keynote Lecture KN1900 ![]() |
Towards 3-D visualization of the ground state atom dynamics in HiPIMS discharges Nikolay Britun1, Jaroslav Hnilica2, Peter Klein2, Petr Vasina2, Matthieu Michiels3, Rony Snyders1 1University of Mons, Mons, Belgium, 2Masaryk University, Brno, Czech Republic, 3Materia Nova, Mons, Belgium Abstract |
||||
09:55 - 10:15 OR1901 ![]() |
BIPOLAR HIGH-POWER PULSED MAGNETRON SPUTTERING OF METALLIC TITANIUM. ROLE OF ELECTRICAL PARAMETERS. MATTHIEU MICHIELS1, Nikolay Britun2, Thomas Godfroid1, Axel Hemberg1, Rony Snyders2 1MATERIA NOVA, MONS, Belgium, 2UMons, ChIPS, MONS, Belgium Abstract |
||||
10:15 - 10:35 OR1902 |
Driving mechanisms for Rotating Spoke and Electron Cyclotron Drift Instability in Magnetized Plasmas with Ε×Β drift Huan LUO1, Tiberiu Minea2, Fei Gao3, Alain Billard4 1UTBM, Site de Montbéliard, Belfort, France, 2LPGP, UMR 8578 CNRS,Université Paris-Sud, Orsay, France, 3FEMTO-ST, Energy Department, UTBM, Belfort, France, 4FEMTO-ST,MN2S, UTBM, Site de Montbéliard, Belfort, France Abstract |
||||
10:35 - 10:55 OR1903 |
HIPIMS: A plasma surface interaction model Ralf Peter Brinkmann1, Dennis Krüger1, Denis Eremin1, Tobias Gergs1, Thomas Mussenbrock2, Jan Trieschmann2 1Ruhr-Universität Bochum, Bochum, Germany, 2BTU Cottbus-Senftenberg, Cottbus, Germany Abstract |
||||
10:55 - 11:15 | Coffee break |
||||
11:15 - 11:35 OR1904 |
Pulse induced modulation of electrical characteristics in ultrathin Molybdenum films Rajesh Ganesan1, Kerstin Thorwarth1, Hans-Josef Hug1 1EMPA Swiss Federal Laboratories for Mate, Dübendorf, Switzerland Abstract |
||||
11:35 - 11:55 OR1905 |
Controlling the B/Ti ratio of TiBx thin films grown by high-power impulse magnetron sputtering Babak Bakhit1, Ivan Petrov2, J.E Greene2, Lars Hultman1, Johanna Rosén1, Grzegorz Greczynski1 1Linköping University, Linköping, Sweden, 2University of Illinois, Illinois, United States Abstract |
||||
11:55 - 12:15 OR1906 |
How to transfer HIPIMS processes using different cathodes and machines Ralf Bandorf1, Dominic Spreemann1, Holger Gerdes1, Michael Vergöhl1, Günter Bräuer1 1Fraunhofer IST, Braunschweig, Germany Abstract |
||||
12:15 - 12:35 OR1907 |
Different types of DLC coatings by Controlling the ion assistance in highly energetic pulsed magnetron discharges in an industrial coating system Herbert Gabriel1, Ivan Fernandez-Martinez2, Ambiörn Wennberg2, Frank Papa3, Jose-Antonio Santiago2, Nico Dams1, Jingzhen Lu4 1PVT Plasma und Vakuum Technik GmbH, Bensheim, Germany, 2Nano4Energy SLNE, Madrid, Spain, 3Gencoa Ltd., Liverpool, United Kingdom, 4PVT (Harbin) Coating Co. Ltd., Harbin, China Abstract |
||||
12:35 - 12:55 OR1908 |
HiPIMS meets Diamond Christoph Schiffers1, Toni Leyendecker1, Oliver Lemmer1, Werner Kölker1, Stephan Bolz1 1CemeCon AG, Würselen, Germany Abstract |
||||
12:55 - 14:20 | Lunch break |
Thursday, September 20, morningRoom Olympia
08:30 - 09:15 | Plenary Lecture PL0006, Room Richard-Strauss |
||||
Oral Session | Session 20 - Other plasma based surface processing technologies
|
||||
09:25 - 09:55 Keynote Lecture KN2000 |
Dielectric coatings for optical application using reactive ion beam sputtering Marcus V. Daniel1, Sebastian Stark1 1scia Systems, Chemnitz, Germany Abstract |
||||
09:55 - 10:15 OR2001 |
Plasma-assisted duplex treatment of AISI 316LM steel: surface micro-structuration by ion beam etching following by a nitriding process. Influence of treatment parameters on tribological properties. Anastasiia Pavlik1, Andrea Cappella2, Mamadou Coulibaly2, Sylvain Philippon3, Thierry Grosdidier2, Gregory Marcos4, Thierry Czerwiec4 1Institute Jean Lamour/LEM3, Nancy, France, 2LEM3, Metz, France, 3Metz, Metz, France,4Institut Jean Lamour, Nancy, France Abstract |
||||
10:15 - 10:35 OR2002 |
Influence of H2 on the TiN/Si interface microstructure elucidated by X-ray photoelectron spectroscopy (XPS) Vinícius Antunes1, Carlos Figueroa2, Fernando Alvarez1 1University of Campinas, Campinas, Brazil, 2University of Caxias do Sul, Caxias do Sul, Brazil Abstract |
||||
10:35 - 10:55 OR2003 |
Customized ion beam technologies for ultra-precision surface machining of optical devices Jens Bauer1, Melanie Ulitschka1, Fred Pietag1, Frank Frost1, Thomas Arnold1 1Leibniz Institute of Surface Engineering, Leipzig, Germany Abstract |
||||
10:55 - 11:15 | Coffee break |
||||
11:15 - 11:35 OR2004 |
Sputtering of MoS2 by argon atoms Aleksandr Palov1, Ekaterina Voronina1, Tatyana Rakhimova1 1Lomonosov Moscow State University, Moscow, Russia Abstract |
||||
11:35 - 11:55 OR2005 |
Metal-Microwave Plasma interaction for Hydrogen Storage Michaël Redolfi1, Sonia Haj-Khlifa1, Jonathan Mougenot1, Yann Charles1, Mahamadou Seydou2, Souad Ammar-Merah3 1LSPM UPR3407, Université Paris, Villetaneuse, France, 2Université Paris Diderot, Paris, France,3ITODYS, Université Paris Diderot, Paris, France Abstract |
||||
11:55 - 12:15 OR2006 |
Influence of radiofrequency magnetron sputtering and microwave plasma combination on the elaboration of SiCxNy:Hz thin films Abdellatif BACHAR1, Angélique Bousquet1, Christine Robert-Goumet1, Guillaume Monier1, Thierry Sauvage2, Laurent Thomas3, Eric Tomasella1 1Clermont Auvergne University, Aubière, France, 2CNRS CEMHTI, Orléans, France,3CNRS PROMES, Perpignan, France Abstract |
||||
12:15 - 12:35 OR2007 |
Plasmaboriding of high-alloyed tool steels – a new approach for wear reduction on highly loaded forming tools Martin Weber1, Markus Mejauschek1, Paschke Hanno1, Günter Bräuer1, Peter Kaestner2, Julian Vogtmann2, Jacob Wessel2 1Fraunhofer IST, Braunschweig, Germany, 2Institute for Surface Technology IOT, Braunschweig, Germany Abstract |
||||
12:35 - 12:55 OR2008 |
Plasma processing of metal-porphyrins and phthalocyanines for the fabrication of low dimensional metal nanostructured layers Juan Ramon Sanchez-Valencia1, A.N. Filippin2, M. Macias-Montero2, M. Alcaire2, F.J. Aparicio2, V. Lopez-Flores2, J.P. Espinos2, M.C. Lopez-Santos2, A. Barranco2, A. Borras2 1Inst.Materials Science-Univ.Seville, Seville, Spain, 2Inst. Materials Science of Seville-CSIC, Seville, Spain Abstract |
||||
12:55 - 14:20 | Lunch break |
Thursday, September 20, afternoonRoom Richard-Strauss
14:20 - 15:05 Plenary Lecture PL0007 |
Chair: Michael Thomas, Braunschweig, Germany Plasma/target interactions in biomedical applications of cold atmospheric pressure plasmas Jean-Michel Pouvesle1, Audoin Hamon2, Thibault Darny2, Claire Douat2, Sebastien Dozias2, Eric Robert2 1GREMI CNRS/Université d'Orléans, Orléans cedex 2, France, 2GREMI CNRS/Université d'Orléans, Orléans, France Abstract |
||||
15:15 - 16:25 | Poster Session 4, Foyer HiPIMS; Other plasma based surface processing technologies; Atmospheric and in liquids plasma; Analytics of film structures and properties; Properties of technological plasmas |
||||
16:25 - 16:45 | Coffee break |
||||
Oral Session | Session 21 - Atmospheric and in liquids plasma
|
||||
16:45 - 17:15 Keynote Lecture KN2100 |
Plasma Printing: Area-selective functionalization of surfaces at atmospheric pressure – Plasma sources and applications Michael Thomas1, Kristina Lachmann1, Marko Eichler1, Antje Dohse1, Claus-Peter Klages1 1Fraunhofer IST, Braunschweig, Germany Abstract |
||||
17:15 - 17:35 OR2101 |
A novel plasma jet with RF and HF coupled electrodes: jet characterization and effects on the surfaces Alessandro Patelli1, Elti Cattaruzza2, Marco Mardegan2, Emanuele Verga Falzacappa2, Valentino Rigato3, Michele Back2, Paolo Scopece4 1University of Padova, Padova, Italy, 2University of Venice, Venice, Italy, 3INFN - Laboratori Nazionali di Legnaro, Legnaro (PD), Italy, 4Nadir srl, Venice, Italy Abstract |
||||
17:35 - 17:55 OR2102 |
Non-Vacuum Plasma Nitriding with Nitrogen-Based Gases Ryuta Ichiki1, Seiga Chiba1, Masayuki Kono1, Naoto Kanda1, Ryoto Otani1, Kiho Toda1, Shuichi Akamine1, Seiji Kanazawa1 1Oita University, Oita, Japan Abstract |
||||
17:55 - 18:15 OR2103 |
Plasma Based Surface Finishing of 3D Printed Metallic Parts Maik Fröhlich1, Sehoon An1, Roland Ihrke1, Holger Testrich1 1INP Greifswald e.V., Greifswald, Germany Abstract |
||||
18:15 - 18:35 OR2104 |
Cold atmospheric plasma processes for water activation: investigating chemical selectivity and energy efficiency for agriculture and medicine applications Thierry Dufour1, Florian Judée2 1Sorbonne Université, LPP, PARIS, France, 2LPP - Sorbonne Université, PARIS, France Abstract |
||||
18:35 - 18:55 OR2105 ![]() |
Coupling of Atmospheric Plasma Jet and Plasma Electrolytic Oxydation as potential alternative for the classical anodization of 3000 aluminum alloys Jérémy Mertens1, Siavash Asadollahi2, Jacopo Profili2, Luc Stafford2, François Reniers1 1Université Libre de Bruxelles, Bruxelles, Belgium, 2Université de Montréal, Montréal, Canada Abstract |
Thursday, September 20, afternoonRoom Zugspitze
14:20 - 15:05 | Plenary Lecture PL0007, Room Richard-Strauss | ||||
15:15 - 16:25 | Poster Session 4, Foyer | ||||
16:25 - 16:45 | Coffee break |
||||
Oral Session | Session 22 - Analytics of film structures and properties I
|
||||
16:45 - 17:15 Keynote Lecture KN2200 |
Concepts for toughening of brittle films by compositional, grain-boundary and interface design Rostislav Daniel1, Christian Mitterer1, Jozef Keckes1 1Montanuniversität Leoben, Leoben, Austria Abstract |
||||
17:15 - 17:35 OR2201 |
Sputter-deposited chromium oxynitride films for strain sensing at high temperature Silvan Schwebke1, Günter Schultes1 1HTW Saar University of Applied Sciences, Saarbrücken, Germany Abstract |
||||
17:35 - 17:55 OR2202 |
Vacancies and Thermodynamics in Al-O-N and Al-Si-N Thin Films Maria Ruth Fischer1, Mathis Trant1, Kerstin Thorwarth1, Daniele Scopece1, Carlo A. Pignedoli1, Daniele Passerone1, Zoltán Balogh-Michels1, Hans Josef Hug1 1Empa, Dübendorf, Switzerland Abstract |
||||
17:55 - 18:15 OR2203 |
In-situ high-temperature X-ray diffraction investigations of magnetron sputtered niobium oxide layers up to 900°C Vincent van Karsbergen1, Paul Angerer2, Nikolaus Weinberger1, Georg Strauss1, Erich Neubauer3, Stefan Marsoner2 1Material Center Tyrol, Univ of Innsbruck, Innsbruck, Austria, 2Materials Center Leoben Forschung GmbH, Leoben, Austria, 3RHP-Technology GmbH, Seibersdorf, Austria Abstract |
||||
18:15 - 18:35 OR2204 |
Easy measurement of the thermal conductivity of coatings with the TDTR method Markus Winkler1, Michael Tkadletz2, Nina Schalk2, Christian Mitterer2, Kilian Bartholomé1, Olaf Schäfer-Welsen1, Markus Pohler3, Christoph Czettl3 1Fraunhofer IPM, Freiburg, Germany, 2Montanuniversität Leoben, Leoben, Austria, 3CERATIZIT Austria GmbH, Reutte, Austria Abstract |
||||
18:35 - 18:55 OR2205 |
Comprehensive Thin Film Analysis by Cross-sectional X-ray Nanodiffraction Juraj Todt1, Rostislav Daniel2, Christian Mitterer2, Manfred Burghammer3, Christina Krywka4, Jozef Keckes2 1Erich Schmid Institute, Leoben, Austria, 2Montanuniversität Leoben, Leoben, Austria, 3European Synchrotron Radiation Facility, Grenoble, France, 4Helmholtz Zentrum Geesthacht, Geesthacht, Germany Abstract |
Thursday, September 20, afternoonRoom Olympia
14:20 - 15:05 | Plenary Lecture PL0007, Room Richard-Strauss | ||||
15:15 - 16:25 | Poster Session 4, Foyer | ||||
16:25 - 16:45 | Coffee break |
||||
Oral Session | Session 23 - Properties of technological plasmas
|
||||
16:45 - 17:15 Keynote Lecture KN2300 |
Nano-structural control of carbon-based thin films by PECVD and their surface modification Shinsuke Mori1 1Tokyo Institute of Technology, Tokyo, Japan Abstract |
||||
17:15 - 17:35 OR2301 |
Plasma parameters measurement of microwave surfatron discharge applied in new plasma-enhanced-ALD Drahoslav Tvarog1, Martin Pultar1, Martin Čada1, Zdeněk Hubička1 1Institute of Physics ASCR, Prague, Czech Republic Abstract |
||||
17:35 - 17:55 OR2302 |
Time resolved tunable diode-laser induced fluorescence measurements of titanium neutral atoms sputtered in reactive Ar/N2 HiPIMS discharge Abderzak EL FARSY1, Ludovic DE POUCQUES1, Jordan LEDIG1, Jamal BOUGDIRA1 1Institut Jean Lamour, Nancy, France Abstract |
||||
17:55 - 18:15 OR2303 |
Simultaneous determination of sheath parameters in an rf-plasma by common and non-conventional diagnostics Felix Georg1, Thomas Trottenberg1, Holger Kersten1 1Christian-Albrechts-Universität zu Kiel, Kiel, Germany Abstract |
||||
18:15 - 18:35 OR2304 |
3D modelling of bipolar magnetron sputtering plasma discharges Andreas Pflug1, Michael Siemers1, Thomas Melzig1, Michael Vergöhl1 1Fraunhofer IST, Braunschweig, Germany Abstract |
||||
18:35 - 18:55 OR2305 |
Numerical Simulation of the Gas Flow in a PECVD Reactor Sandra Gaiser1, Dirk Hegemann1 1Empa, St. Gallen, Switzerland Abstract |